- Welcome to TopFreeBiz.com:
- Join Now |
- Sign In |
- Contact Us
Hot Products
uf resin
Specifications: Appearance: White powder Water content: ≤2% PH: 7.0-8.0Dissociate Formaldehyde: 5.0% (min) Particle size: 100% passed 100mesh, 90% passed 120mesh, Glued strength: 1.2Mpa above Payment Terms:L/C,T/T(Bank Transfer),
Environment Friendly One Component Special Adhesive for Polyurethane Pavement Material
________________________________________ Detailed DescriptionCompositionThis product is colorless or light yellow viscous liquid, which is performed polymer ended capping by isocyanate. Part C is catalyst。We can regulate the curing rate of wares by increasing or decreasing...
Modified MDI (DG5412)
Product Introduction：DG5412 is a modified organism of Diphenyl methane diisocyanate(MDI) which has higher functionality isocyanate. It is mainly used for producing cold cure high rebound foam, which applies to furnitures, toys, automobiles and other fields.Physical Properti...
Polyurethane Foam
IntroductionDHR－A (Part A) adopts all water technology, it consists of hyperactivity polyether polyol and POP, crossing linking agent, foaming agent, flame retardant and compound catalyst etc. It reacts with isocyanate DHR-B(compound B), adopting cold moulding technology HR...
FEP
Perfluorinated ethylene-propylene (FEP) for wire and cable is the copolymer of tetrafluoroethylene(TFE) and hexafluoropropylene(HFP) with excellent thermo-stability, outstanding chemical inertness, low friction coefficient, distinctive air aging resistance, vapor penetratin...
zinc oxide
Product Name: zinc oxide Product Name Zinc Oxide (99.7%)H.S.Code 28170010CAS No. 1314-13-2Molecular Formula ZnOMolecular wt 81.83Production standard Q/SNBJ4-2006Index RequestZnO 99.7% minZn 045μm sieve residue 0.1% maxMnO 0.0001% maxPbO 0.037% maxCuO 0.0002% maxLoss on Ig...
High Density Polyethylene (HDPE)
HDPE cable material Property Unit Typical Value Mass density g/cm3 0.941-0.959 Melt flow Rate(190℃/2.16kg) g/10min ≤1.0 Tensile yield strength MPa ≥19.0 Flexural modulus Mpa ≥965 Elongation@ break % ≥...
polyamide resin
Properties:light yellow granular (powdery) solid. Uses:It has good stability, good solvent releasing capacity, and good resistant to bending, good glossiness, good adhesive force and good resistance to gel. It can be used in printing industry to produce solvent type printin...
6-inch photo frame resin fine carved
6-inch photo frame resin fine carved Size: 21 * 17 * 2CM Color: White Notes: white box effect of the pattern edge and relief, there is a strong three-dimensional effect. Place of Origin:Zhejiang in China
EPS raw material
JIACHANG EPS SPECIFICATION GRADE SPECIFICATION BEADS SIZE PENTANE CONTENT FOAM MULTIPLE FOAM DENSITY G/L USE A-STANDARD GRADE A-103 1.00-1.60 70-90 11.0-14.0 USE FOR BLOCK AND LOW DENSITY PRODUCT A-104 0.85-1.25 65-85...
polyamide resin
Properties:light yellow granular (powdery) solid. Uses:It has good stability, good solvent releasing capacity, and good resistant to bending, good glossiness, good adhesive force and good resistance to gel. It can be used in printing industry to produce solvent type printin...
polyamide resin
Properties:light yellow granular (powdery) solid. Uses:It has good stability, good solvent releasing capacity, and good resistant to bending, good glossiness, good adhesive force and good resistance to gel. It can be used in printing industry to produce solvent type printin...
polyamide resin
Properties:light yellow granular (powdery) solid.Uses:It has good stability, good solvent releasing capacity, and good resistant to bending, good glossiness, good adhesive force and good resistance to gel. It can be used in printing industry to produce solvent type printing...
Polyamide Resign
polyamide resign is produced by the reaction of dimer acid and polyamine.it is maily used to produce different kinds of gravure and flexible printing plastic ink and paper ink.it is suitable to be used in printing materials like PE,PVC,PP,cellophane,terylene,paper and so on...
dipentaerythritol 85%
Product Name: Dipentaerythritol CAS RN.: 126-58-9 Specification: Molecular Formula: C10H22O7 Di-PE, wt, %: 85min Mono-PE, wt %.: Max. Tri-PE, wt %: 10 max. Hydroxyl group, wt. %, min.: 38-40 Moisture, wt. %,: 0.1max. Ash, wt. %,: 0.5max. Melting Point: 205-224 degree U...
2,4-Diethylthioxanthone DETX
Product name: 2,4-Diethylthioxanthone DETX CAS NO.: 82799-44-8 Appearance: light yellow powder Purity：99%min We can offer UV-531,UV-9,DETX Place of Origin:China|
hot melt polyamide
Hot melt adhesive HY-208: 1) Apperance: light yellow granular substance 2) Characteristic: Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolv...
Hot Melt Adhesive
Hot melt adhesive HY-208: 1) Apperance: light yellow granular substance 2) Characteristic: Polyamide hot melt adhesive formed by the high-temperature condensation reaction of dimer acid and the multi-dimensional amine. It is able to dissolv...
Benzene polyamide resin
Benzene polyamide resin HY-108: 1) Appearance: Light yellow granular substance 2) Characteristic: Good solubility to alcohol. Dissolves aids the release is extremely good solvent release. Good adhesion. 3) Use: Gravure printing ink....
Fumaric Acid
Fumaric acid (1).【CAS】 : 110-17-8 (2). Molecular Formula: C4H4O4 Molecular weight: 116 （3）Performance and use: white crystal, fruit sourness, burn It is mainly used as material of polyester resin and alkyd resin. It can produce bond with ethylene-vinlac...
Biodegradable Starch Resin (BSR)
Biodegradable Starch Resin (BSR) is yellowish to white translucent particles. With main ingredients of starch, degradable PS/PP, EAA, degradable PE, glycerin and sorbitol, all the components meet the world health organization’s standard. Its mechanical property is simil...
TPU material for auto parts
Our Company is a specialized TPU material manufacturer and supplier with yearly production capacity 10,000mt in China. We can supply your high quality and competitive price TPU clear pellets, 65A-71D, injection and extrusion grade. Under such world-wide difficult economical...
TPU for injection
Our Company is a specialized TPU material manufacturer and supplier with yearly production capacity 10,000mt in China. We can supply your high quality and competitive price TPU clear pellets, 65A-71D, injection and extrusion grade. Under such world-wide difficult economical...
Modified Material (PA1212)
The nylon 1212 developed solely and uniquely by the center has filled in the gap of China and has been rated to meet PA11 and PA12 standards of similar foreign products in respect of performances and indexes through appraisal by the authoritative agencies in China.Furthermo...
