- Welcome to TopFreeBiz.com:
- Join Now |
- Sign In |
- Contact Us
Hot Products
White Oak Edge-Glued Panel
Species: White Oak Type: Solid, Finger-Joint, Cut Stock, Finger-Joint+Solid. Grade: AB, BB, AC, BC. Thickness: Up to 50mm Width: Up to 1300mm Length: Up to 4200mm Tolerance Thickness: -/+0.5mm Tolerance Width: -/+5mm Tolerance Length: -/+5mm Moisture: 6~10% San...
Red Oak Solid Edge-Glued Panel
Type: Solid, Finger-Joint, Cut Stock, Finger-Joint+Solid. Grade: AB, BB, AC, BC. Thickness: Up to 50mm Width: Up to 1300mm Length: Up to 4200mm Tolerance Thickness: -/+0.5mm Tolerance Width: -/+5mm Tolerance Length: -/+5mm Moisture: 6~10% Sanding Grit: #150 ...
Red Oak Solid Edge-Glued Panel
Type:Solid, Finger-Joint, Cut Stock, Finger-Joint+Solid. Grade: AB, BB, AC, BC. Thickness: up to 50mm Width: up to 1300mm Length: up to 4200mm Tolerance Thickness: -/+0.5mm Tolerance Width: -/+5mm Tolerance Length: -/+5mm Moisture: 6~10% Sanding Grit: #150 ...
Red Oak Finger-Joint Edge-Glued Panel
Type: Solid, Finger-Joint, Cut Stock, Finger-Joint+Solid. Grade: AB, BB, AC, BC. Thickness: Up to 50mm Width: Up to 1300mm Length: Up to 4200mm Tolerance Thickness: -/+0.5mm Tolerance Width: -/+5mm Tolerance Length: -/+5mm Moisture: 6~10% Sanding Grit: #150 ...
White Oak Edge-Glued Panel
Species: White Oak Type: Solid, Finger-Joint, Cut Stock, Finger-Joint+Solid. Grade: AB, BB, AC, BC. Thickness: Up to 50mm Width: Up to 1300mm Length: Up to 4200mm Tolerance Thickness: -/+0.5mm Tolerance Width: -/+5mm Tolerance Length: -/+5mm Moisture: 6~10% San...
Oak Edge Glued Panel
Oak Edge Glued Panel One 20' Container 19mm Thick, 1016mm Wide and 762mm and 940mm Long (Tall). Grains towards 762mm and 940 mm. A/A quality Knots on any side won't be acceptable. The pieces (Lamella) is minimum 75mm to maximum 100mm to form 1016 mm. ...
Red Oak Finger-Joint Edge-Glued Panel
Type:Solid, Finger-Joint, Cut Stock, Finger-Joint+Solid. Grade: AB, BB, AC, BC. Thickness: up to 50mm Width: up to 1300mm Length: up to 4200mm Tolerance Thickness: -/+0.5mm Tolerance Width: -/+5mm Tolerance Length: -/+5mm Moisture: 6~10% Sanding Grit: #150 ...
