- Welcome to TopFreeBiz.com:
- Join Now |
- Sign In |
- Contact Us
Cold Shrink Terminals & Joints
WOER cold shrink cable accessories are manufactured with advanced liquid silicon rubber, which has high resilience and strength, good electrical insulation, is UV stable and adverse to water. The cold shrink cable terminations & joints applications from 1 to 36kV (1kV, 12k...
Heat Shrinkable Joints (XL-JSY-10/3.2)
24kv Heat Shrinkable Cable Joints Heat shrinkable cable accessories Single core and 3 cores indoor and outdoor termination kits and straight through joints
1kv Heat Shrinkable Joints Protective Tube (XL-HT10-50/18)
Heat shrink tubes are used to provide insulation protection for cable terminals, joint, etc.
Joints
Guaranty for 2 years or 60, 000Kms If you have the demand, please contact with us. We can supply the best competition with the best price.
35kv Heat Shrinkable Joints
11KV -- (upto 15kv)Heat shrinkable kits for power cables Termination and joint Kits 11Kvproducts of cable termination are mainly and universally applied to dealing with disconnection place of Cable below 11KV. Indoor/outdoor heat-shrink cable termination application: Pr...
Heat Shrinkable 1kv Joints (XL-JSY-1/3.4)
1KV -- Cable heat shrinkable kits 0.6/1kv cable termination and joints are mainly and universally applied to Dealing with disconnection Place of cable below 1KV. In cable cores, products Are classified single core, three cores, four cores And five cores etc. 1KV heat-shri...
AJ Type Safety Joints
AJ type safety joint is a specialized joint consisting of two parts. The specialized joint takes protective effect for drilling stem in drilling, repairing and test oil (gas )engineering, etc. It is used to treat well accident and used to be on-the-way test in drilling and...
Safety Joints Type H
The H type safety joint, which is installed on the position required for subsurface drill stem and can bear in fishing operation all kinds of loads for pulling or pressing and used to transmit torque, is a subsurface safety equipment. In down hole operation, in case of bei...
Unversal Joints
We have been doing bearing business for over fifteen years, we own the ability to supply the bearings with competitive price, good quality, perfet service and short delivery time. GUT GU GUM GUN
Integral Pup Joints
Manufactured by high intensity alloy steel and fully heat-treated, the connection compliance with API standard, it include sloping shoulder and straight shoulder according to it's upper shoulder shape.
C. V. Joints & Drive Shafts
We have been doing bearing business for over fifteen years, we own the ability to supply the bearings with competitive price, good quality, perfet service and short delivery time.
Tool Joints
Tool joints of our company are made of modified alloy steel, then fully heat treated. So the mechanical properties in accordance with API specifications, such as strength, hardness and impact strength are gaged to standard. All connections are gaged to API Spec. And phosph...
1kv Heat Shrinkable Power Cable Joints
1KV -- Cable heat shrinkable kits 0.6/1kv cable termination and joints are mainly and universally applied to Dealing with disconnection Place of cable below 1KV. In cable cores, products Are classified single core, three cores, four cores And five cores etc. 1KV heat-shri...
Heat Shrinkable Joints
24kv Heat Shrinkable Cable Joints Heat shrinkable cable accessories Single core and 3 cores indoor and outdoor termination kits and straight through joints
Dismantling Joints
Shanxi Kewell Industrial Co., Ltd can produce the dismantling joints, it is manufactured to provide longitudinal adjustment in flanged pipe systems. Dismantling joints provide a simple method for the installation and removal of flanged valves, pumps, flow meters, flang...
Universal Joints
Shanxi Kewell Industrial Co., Ltd produce the couplings, flange adaptors and all kinds of joints, it is designed to accommodate plain ended pipes with different outside diameters, one fitting is able to onnect steel, ductile iron, UPVC, cast iron and asestos cement pip...
Magnetic Universal Joints
Magnetic Universal Joint Features: 1. Magnetic universal joint is made by powerful NdFeB magnet 2. Magnetic universal joint's body is made by brass with tapped hold to mount on any surface 3. Can hold anything within stipulated load at any angle For more detail info...
C. V. Joints (TO-12)
Size: Outer Teeth: 26T Inner Teeth: 27T Seal Diameter: 56mm 1. 500 kinds of CV Joints meet your requirements. 2. Production capacity of 80, 000PCS/month. 3. Our products are approved ISO9001-2008/TS16949 international quality certification. 4. Customer's own d...
Fast Connecting Joints
Fast connecting joints Technical date: 1. Maximum electrical rating: 600 Volts 2. Maximum temperature: 105 3. Terminal material: Brass 4. Plating: Tin 5. Insulating material: PP Features: 1. A fast and easy way to splice into an existing wire 2. No stripping o...
CV Joints (TO-A-570)
Size: Outer Teeth: 20T Inner Teeth: 24T Seal Diameter: 35mm 1. 500 kinds of CV Joints meet your requirements. 2. Production capacity of 80, 000pcs/month. 3. Our products are approved ISO9001-2008/TS16949 international quality certification. 4. Customer's own d...
U-Joints
1. Material: 20Cr or 20CrMnTi 2. Surface hardness: 58-64HRC Inner hardness: 20Cr: 25-45HRC; 20Cr MnTi: 33-48HRC Full range for the universal joint 3. We have obtain the ISO9001: 2000 certificate 4. Excellent quality with reasonable price Samll order accepeted 5. OEM...
Copper Busbar Expansion Joints
1 High quality 2 Low price 3 Quick delivery 4 Can ne customized We provide best quality copper busbar, that are immensely useful for low voltage distribution, high current and control equipment. Known for excellent electrical conductivity, these copper bus bars ...
CV Joints (TO-41)
Size: Outer Teeth: 23T Inner Teeth: 21T Seal Diameter: 56mm 1. 500 kinds of CV Joints meet your requirements. 2. Production capacity of 80, 000PCS/month. 3. Our products are approved ISO9001-2008/TS16949 international quality certification. 4. Customer's own d...
Ball Joints for Toyota Oe43330-09590
Specifications 1. OEM NO: 43330-09590 2. Application: For TOYOTA 3. Good price, best quality
PVC Plastic Joints DIN Standard PN10
PVC Plastic Joints DIN Standard PN10 with Sovlent Joint DIN Standard PN10 PVC 45 Degree Elbow PVC 90 Degree Elbow PVC Tee PVC Reducing Tee PVC Clamp Saddle PVC Socket PVC Reducing Socket PVC Female Threaded Adaptor PVC Double Male Threaded Adaptor PVC Male Thre...
Rubber Expansion Joints
Specifications Bridge expansion joint separate the structural elements above the basic, and set apart appropriate gap between both sides in order to ensure the structural elements on both sides of expansion joint free flexible in horizontal direction. The wide of sew is a...
Vacuum Cupping Cup for Human Joints (JM-030#6)
New cupping cup for human joints: 1. OEM. Patent product. Product Inspection Report 2. No side effect cupping cup 3. Certification: ISO9001, CE New cupping cup for human joint (No. 6) 1. It is made of PC. 2. It is used for human joint. 3. It is patent ...
Spicer Universal Joints
Features: 1) Materials: 20Cr 2) Can develop according to customer's drawings or samples 3) OEM is available Inner packing: Plastic sacks and paper boxes Outer packing: Paper cartons and wooden pallets Our product include: U-joint with 4 plain round b...
Heat Shrink Cable Joints
Heat shrink terminations and joints 33kV are mainly applied to deal with Disconnection place of cable below 33kV system voltage. The products are classified single or three cores. The 33kV indoor/outdoor heat shrink terminations are suit for dealing with the end place o...
Drive Shaft U Joints 5-297X
Features: 1) Materials: 20Cr 2) Can develop according to customer's drawings or samples 3) OEM is available Inner packing: Plastic sacks and paper boxes Outer packing: Paper cartons and wooden pallets Our product include: U-joint with 4 plain round b...
Cold Shrink Terminations Kits & Joints
WOER cold shrink cable accessories are manufactured with advanced liquid silicon rubber, which has high resilience and strength, good electrical insulation, is UV stable and adverse to water. The cold shrink cable terminations & joints applications from 1 to 36kV (1kV, 12k...
Cold Shrink Cable Joints
Use: Cold shrink cable joint for XLPE -insulated 1 or 3 cores cables with Al or Cu conductor, 1-36kV. Design: The joint body is made of advanced liquid silicone rubber with three layers: A conductive outer layer, an insulating layer and a conductive inner layer. The join...
Safety-type Wire Joints
Product Name: Safety-type Wire Joints Material: Nylon 66 94V-2 Certificated by UL Usage: Peel the coat of wire, then insert to the tube and use tools to fix them Feature: Nylon shell, Long copper tube, easy to conduct electricity and hole wire tightly ...
Universal Joints (Cardan Joint)
Features: 1) Materials: 20Cr 2) Can develop according to customer's drawings or samples 3) OEM is available 4) Part No: 5-279X Inner packing: Plastic sacks and paper boxes Outer packing: Paper cartons and wooden pallets Our product include: U-joint with...
Vehicle C. V. Joints
Vehicle C. V. Joints We produces Inner C. V. Joints, Outer CV Joints, drive shafts & Brake pads. Vehicles brands are Audi, DAEWOO, DAIHATSU, Honda, HYUNDAI, ISUZU, MAZDA, MITSUBISH, Nissan, SUBARU, SUZUKI, Toyota, VOLKS WAGEN etc. Item No.: MATIZ 1. 300 kinds of...
Corner Joints with 90 Deg Angel
90 degree elbow connector Our company is specialized in researching, developing, producing and selling single-use medical instruments. Our main products, as singl-use anesthetic laryngoscope, single-use fixer, have gained several pantents from our National Intellect...
C. V. Joints (OP-007)
C. V. JOINTS CV JOINT We produces Inner C. V. Joints, Outer CV Joints, drive shafts & Brake pads. Vehicles brands are Audi, DAEWOO, DAIHATSU, Honda, HYUNDAI, ISUZU, MAZDA, MITSUBISH, Nissan, SUBARU, SUZUKI, Toyota, VOLKS WAGEN etc. Item No.: OP-007 SIZES: Outer T...
CV Joints C. V. Joint Drive Shaft for Suzuki Vehicle
We produces Inner C. V. Joints, Outer CV Joints, drive shafts & Brake pads. Item No.: SK-1-035 Application: SUZUKI Size: Outer Teeth (A): 22T Inner Teeth (F): 19T Seal Diameter (O): 51mm 1.300 kinds of CV Joints meet your requirements. 2. Production capacity ...
Universal Cross Bearing Universal Joints Bearing (FT-B-024)
1. Joint Bearing: OEM Joint Bearing service is available and brand as well 2. Bearing Brands: SKF, NTN, INA, TIMKEN, NSK, NACHI, KOYO, IKO 3. Bearing Brand: Our own brand BSK Focusing on High quality Bearing 4. Row Type: Single Row, Double Rows, Four Rows Taper Roller B...
15kv 3 Cores Heat Shrinkable Cable Joints
15kv 3 cores heat shrinkable cable joints(Raychem substitute ): Used to combine 2 seperate cables mainly underground. 15kv 3 cores heat shrinkable cable joints Heat shrinkable cable joints for 8.7/15KV 3 cores cable Heat shrink rain shed offering 1-core, 3-...
